PDA

View Full Version : IBM PS/2 Ultimedia M57 486slc2 parts


84TAVeRT
September 6th, 2007, 01:05 PM
I am parting out this ultimedia...

good motherboard with microchannel riser
486 slc2-50 <-- Edited to reflect actual speed
8mb ram

200mb SCSI HD
4x SCSI CDrom with carrier
microchannel sound board (stock for ultimedia)
Good Stock PSU

all cables are included

I am keeping the ultimedia front panel and both the 1.2mb and 2.88mb floppy drives for now...

make offers, I will try to estimate shipping...

later,
Chris

IBMMuseum
September 7th, 2007, 11:29 AM
...good motherboard with microchannel riser
486 slc2-75 i believe...


If it is an SLC2 it is 50MHz max (as the main CPU on the motherboard, if it were a CPU daughtercard upgrade from the 386SX-20 or 386SLC-20, it will run at 40MHz). The 486SLC3 version ran the CPU at 75MHz (with the same daughtercard contraints if upgrading a 386SX or 386SLC motherboard, a 3x multiplier of the motherboard CPU clock). I can break it down for the submodel encoding, but sometimes the systems were modified after factory without updating the stickers.

84TAVeRT
September 7th, 2007, 02:09 PM
i powered it up and ran chkcpu... it is in fact a 50mhz...

CPU Identification utility v1.14
-----------------------------
CPU Vendor and Model: 'classic' 486
Internal CPU speed: 52.7mhz
CPU-ID Vendor string: - No CPUID -
Current CPU mode: Real
Internal (L1) cache: Enabled in Write-Through mode