Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: TRS-80 model II boot disk

  1. #11
    Join Date
    Apr 2005
    Location
    Stevens Point, Wisconsin
    Posts
    2,245

    Default

    Are you talking about where they run the lines back to an internal terminator via a dongle-like thing ?
    patscc

  2. #12
    Join Date
    Jan 2007
    Location
    Pacific Northwest, USA
    Posts
    12,103
    Blog Entries
    16

    Default

    Quote Originally Posted by patscc View Post
    Are you talking about where they run the lines back to an internal terminator via a dongle-like thing ?
    patscc
    That's it.

  3. #13

    Default

    Hello guys, thanks for the replies!

    I'd check the drive again, there was a part missing
    to press the disk onto the head. I realy don't know how to call it.
    I'd took it from one of the tree other drives which is missing the PCB.

    CIMG3354.JPG

    The error is now constantly "BOOT ERROR TK"
    It seems to be a not usable boot disk according this website:
    http://home.claranet.nl/users/pb0aia/cm/m2errors.html

    Besides, the bootdisk was in the machine when I got it.
    So maybe it got zapped the last time it was used?

    The disk terminator is in the right place. (But if I remove
    it the "BOOT ERROR TK" message still appears. No changes.)

    If I place any other non-bootable disk into the machine the
    message "BOOT ERROR RS" appears. Which means
    "No radio shack operating system format"

    So I really think the boot disk is erased...

    Regards, Roland
    Last edited by Roland Huisman; October 11th, 2012 at 02:46 PM.

  4. #14
    Join Date
    Oct 2008
    Location
    Vancouver, BC, Canada
    Posts
    2,058

    Default

    It's more than likely the disk got hosed. Trying to use the drive with the missing felt pad wouldn't do it any miracles either.
    = Excellent space heater

    Wanna help feed my OCD?
    I have always wanted to run a PDP with some sort of disk (RK-05?) or tape (TU-56?) subsystem.
    ** seeking working/dead/gutless ProFiles**

  5. Default

    Roland,

    Download this PDF. http://electrickery.xs4all.nl/comp/t...RM_FDC_REV.pdf

    Check PG 16. If this is the floppy controller you have, then you have the later revision and do not require a terminator loopback.

    If you are using an original Radio Shack floppy diskette, I'm not surprised it's dead. I haven't found an original RS 8" disk that works. If you look at the disk you will see concentric circles on the disk surface where the oxide has been scraped off by the head like a scratch and win lottery card.

    If you wind up needing a good boot disk, send me a private message via the forum with your snail mail address.

    Cheers!

    Kevin

  6. #16
    Join Date
    Jan 2009
    Location
    Palm Springs CA
    Posts
    291
    Blog Entries
    19

    Default

    It is not uncommon (and actually recommended practice) to transport a machine/drive with the cardboard insert OR a 'sacrificial' disk... to prevent 'head damage'.

    It is (unfortunately) possible that the head is off by 'just enough' to keep it from reading properly... but it would be best to try a KNOWN GOOD disk first before going all hinky on the drive.

    Were you referring to the arm with the head on it? OR the 'other side'??? (hopefully!!!)
    IF it IS the head-side, you likely have MAJOR alignment issues... unless you got SUPER-LUCKY!

    Will hope for better things!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •